Motorization
Control light and privacy with a simple click
Update to LEVOLOR's motorized options to control light and privacy using a remote control or the LEVOLOR app.
LEVOLOR App
(with Premium 6-Channel Remote only)
Note: LEVOLOR Premium 6-channel remote is required in order to use the LEVOLOR app; Basic 3-channel remote is not compatible with app.
Premium 6-Channel Remote
Basic 3-Channel Remote
Comparison Chart
LEVOLOR App
LEVOLOR’s Bluetooth® enabled app allows you to schedule your window coverings to adjust automatically on a timed schedule, when paired with the Premium 6-Channel Remote.
Our unique technology allows users to program a schedule on the app while they are within range of the window covering and remote, and it will still operate once they leave the home. However, the app can not be used to adjust the programmed schedule while away from the home. The device with the app must be within the range of the remote and window covering to change the schedule.
Premium Remote
Download the LEVOLOR App on your Apple and Android devices to walk through the pairing process. Use the App's scheduling function to program your window coverings to adjust automatically, while you're at home or away.
Copies of the LEVOLOR Remote Control Guide along with "How to Pair the Remote" videos are available to help walk you through the setup and operation of the 6-channel remote control.
Quick Pairing Guide: Add a blind to a GROUP.
- To begin program mode press and hold the stop button on remote until the white program light starts flashing
- Select GROUP 1 (blue light above 1 button will blink)
- Press and HOLD the manual control button on the window covering
- While continuing to hold the manual control button on the window covering, press and HOLD the up arrow on the remote
- Hold BOTH buttons until the window covering moves slightly up and down (should only take a few seconds)
- Release both buttons
- To end program mode, press and hold the stop button on remote until the white program lights stops flashing
The remote will now operate the blind when Group 1 is selected. Repeat steps 1-7 to add blind to groups 2-6 if desired.
Basic Remote
"How to Pair the Remote" videos are available to help walk you through the setup and operation of the 3-channel remote control.
Note: The LEVOLOR 3-channel remote will NOT pair with the LEVOLOR app. To use the app you must purchase the 6-channel remote control.
Quick Pairing Guide: Add a blind to a GROUP.
- To begin program mode press and hold the stop button on remote until the red program light starts flashing
- Select GROUP 1 (Green light above 1 button will blink)
- Press and HOLD the manual control button on the window covering
- While continuing to hold the manual control button on the window covering, press and HOLD the up arrow (open) on the remote
- Hold BOTH buttons until the window covering moves slightly up and down (should only take a few seconds)
- Release both buttons
- To end program mode, press and hold the stop button on remote until the red program lights stops flashing
The remote will now operate the blind when Group 1 is selected. Repeat steps 1-7 to add blind to groups 2 & 3 if desired
Lift Control
Motorization
Control light and privacy with a simple click. Upgrade to LEVOLOR’s motorized options to raise and lower your shades open and close using a remote control or the LEVOLOR app.
Note: LEVOLOR 6-channel remote is required in order to use the LEVOLOR app; basic 3 channel remote is not compatible with app.
Cordless
Easy cordless operation, a safer option for homes with children and pets. Clear handle optional.
Cord Loop
Easily open or raise shade to the desired height, while maintaining the same cord length.
LEVOLOR App
(with Premium 6 Channel Remote only)
Premium 6 Channel Remote
Basic 3 Channel Remote
Valance Style
Open Roll
Fabric rolls from the back; provides greatest light control.
Available on Fabric and Solar Shades only.
Standard Valance
Standard valance, with matching fabric insert, covers roller tube.
Available on Fabric and Solar Shades only.
Cassette Valance
Fabric wrapped cassette covers roller tube.
Mounting Options
Reverse Roll
Fabric is rolled so that it hangs from the front of the roll for a more finished look.
Not available with cassette valance option; only available on Fabric and Solar Roller shades.
2-on-1 Headrail
Two shades operate separately on the same headrail.
Limited to Cord Loop Lift Control
Inside Mount
For a framed look.
Outside Mount
For increased light control and privacy.
Light Control
Solar fabrics block light, but not the view. Openness rating is the percentage of UV rays that pass through the fabric.
Lighter solar fabrics reflect more heat and light, and provide a little less view during the day.
Darker solar fabrics absorb heat, and provide greater view during the day.
Pull Type Options
Tassels
- Locate optional bottom rail handle that arrived with your shade.
- Insert front lip of the bottom rail handle into the top of the bottom rail of the shade. The handle will snap into place.
- Optional bottom rail tassel will come attached to shade.
Handle
- Transparent hem grip lets you raise and lower your shade without touching the fabric.
- Not available for scallop decorative hem.
None
- Raise and lower your shade without tassels or the transparent handle.
How to Measure
Measuring For Inside Mount Roller Shades
For a beautiful framed look
Find Width:
Measure to the nearest 1⁄8 in. between inside surfaces of window frame; at the top, middle, and bottom. Record the narrowest width of the three.
Find Height:
Measure to the nearest 1⁄8 in. from inside surface at top of window to top of sill; at the left, middle, and right. Record the tallest height of the three.
Find Depth:
Measure exact depth of window casing making note of any obstacles i.e. handles, tracks or cranks that could interfere with the blind or shade function. Use the shortest depth.
Measuring For Outside Mount Roller Shades
For increased light control and privacy
Find Width:
Measure to the nearest 1⁄8 in. between outermost points where shade is to be placed. Measurement should overlap each side of window frame by at least 1 1⁄2 in.
Find Height:
Measure to the nearest 1⁄8 in. from where top of shade will be located to top of sill, or measure to point of shade reach if no sill.
How to Measure Two Shades on One Headrail (2-on-1 Headrail)
INSIDE MOUNT (IM) INSTALLATION
MEASURE WIDTH
Overall Shade Width - Measure to the nearest 1⁄8 in. between inside surfaces of window frame; at the top, middle, and bottom.
Left Shade Width - Measure the width that you want the left shade to cover.
Right Shade Width - Measure the width that you want the right shade to cover.
MEASURE HEIGHT
Overall Shade Height - Measure to the nearest 1⁄8 in. from inside surface at top of window to top of sill; at the left, middle and right.
MEASURE DEPTH
Overall Shade Depth - Measure exact depth of window casing making note of any obstacles i.e. handles, tracks or cranks that could interfere with the blind or shade function.
OUTSIDE MOUNT (0M) INSTALLATION
MEASURE WIDTH
Overall Shade Width - Measure to the nearest 1⁄8 in. between outermost points where shade is to be placed. Add an additional 3 in. to 6 in. to total width for maximum privacy.
Left Shade Width - Measure the width that you want the left shade to cover. Order this shade first when placing your order.
Right Shade Width - Measure the width that you want the right shade to cover.
MEASURE HEIGHT
Overall Shade Height - Measure to the nearest 1⁄8 in. from where top of shade will be located to top of sill, or measure to point of shade reach if no sill.
2-ON-1 HELPFUL NOTES:
- Available in Continuous Cord Loop Only.
- Each shade operates separately.
- There will be a gap between the fabric on the left and right shades to operate independently.
- Light gap is 1-1⁄16 in. — (Light Gap is the space needed between the 2 shades to ensure proper operation.)
- Left shade controls are on the left side and the right shade controls on the right side.
- Always use a metal tape measure as cloth may stretch.
- Take all measurements to the nearest 1⁄8 in. DO NOT take any deductions.
- The factory will make the necessary adjustments to help ensure your shade operates smoothly.
NOTE: Take all measurements to the nearest 1/8 in. DO NOT take any deductions. The factory will make the necessary adjustments to help ensure your shadings operate smoothly.
How to Install Solar Shades
Before you begin your installation:
Read all installation instructions!
- Leaving the shade rolled up completely will ease installation.
- Confirm that the headrail and shade are the proper width and length.
- If installing several sets of shades, be sure to match them with the appropriate window.
- Check the installation surface to ensure that you have suitable fasteners and tools.
- Lay out and organize all parts and components.
- Proper shade direction during installation:
For Traditional Roller Shades, fabric will hang off the back of the shade, closest to the window.
For Optional Reverse Roller Shades, fabric will hang off the front of the shade.
Tools You May Need (not included):
- Metal Tape Measure
- Screwdrivers (both flat and Phillips head)
- 1/4" Nutdriver
- Safety Glasses
- Drywall Anchors
- Pencil
- Drill with Bits
- Level
- Ladder
Step 1 - Inside Mount
Marking the Bracket Locations
IMPORTANT: Before marking bracket locations, ensure that your bracket placement will not interfere with any components inside the headrail.
- Verify that your window casing has a minimum depth of 1 ½" which allows for a partially recessed headrail mount.
- If flush mount (fully recessed mount) is desired, a minimum mounting depth of 2 1⁄2" is required.
- Place brackets at either end of inside mount frame.
- Mark 1–2" from each jamb for bracket location.
- With a pencil, mark the longer, oblong drill hole locations through the top of the holes of the bracket, 2 holes per bracket.
Step 1 - Outside Mount
Marking the Bracket Locations
IMPORTANT: The brackets must be flush against a flat mounting surface. Do NOT mount brackets on curved molding.
- Center the headrail over the window opening at the desired height.
- Mark screw locations for each end bracket, 2 holes per bracket.
Use a level to ensure all brackets are aligned.
Step 2 - Inside Mount
Installing the Brackets
- Pre-drill screw holes using a 1⁄16" drill bit (wood and metal mounting surfaces only) using pencil marks as a guide.
If installing brackets into wood, use supplied screws.
If installing into drywall, use anchors in combination with supplied screws. - While holding the bracket in place, secure the bracket with screws, 2 screws per bracket.
- Ensure all brackets are square with each other.
Step 2 - Outside Mount
Installing the Brackets
- Pre-drill screw holes using a 1⁄16" drill bit, using pencil marks as a guide.
If installing brackets into wood, use supplied screws.
If installing into drywall or other, use anchors in combination with supplied screws. - Screw in brackets at marked locations, 2 screws per bracket.
- Ensure all brackets are square with each other.
Step 3 - Inside Mount
Installing the Shade
- Place bead-chain side of shade into end bracket first.
- On the other side of shade, compress the spring loaded end plug and secure into opposite bracket.
Shade is secure when spring clicks into bracket. - Slide bracket end caps over brackets for a finished appearance.
- CAUTION: Be sure the brackets are properly engaged before operating the shade. Failure to do so may result in the shade falling and possible injury.
Step 3 - Outside Mount
Installing the Shade
- Place side of shade with the bead chain into end bracket first.
- On the other side of shade, press in the spring loaded end plug and secure into opposite bracket
Shade is secure when spring clicks into bracket. - Slide bracket end caps over brackets for a finished appearance.
The wider end cap covers the spring end plug side bracket.
The narrower end cap covers the bead chain side bracket. - CAUTION: Be sure the bracket and headrail are properly secured before operating the shade. Failure to do so may result in the shade falling and possible injury.
Additional Components
Continuous Cord Loop Cord Tension Device
- Continuous Cord Loop Shades will arrive with the tension device mounted to the shade.
- Use the included screws to secure the hold-down tension device to the mounting surface, ensuring that the cord loop is taut.
- SEE WARNING LABEL ON SHADE
Install the Tension Device
- Slide the cord tensioner down to the bottom of the cord loop.
- Using the screws provided, attach the tension device to the wall, allowing some slack for the cord to slide through easily.
IMPORTANT: When installing into drywall or plaster, use 3⁄16" drill bit and insert wall anchors (size 1⁄2", not included) before inserting the screws. When installing in metal, use appropriate anchors for metal substrate.
IMPORTANT: The tension device provides smooth operation of the shade. The shade will not operate properly unless the tension device is installed.
WARNING: It Is imperative that the cord tensioner be properly secured to the wall or window frame to reduce children’s access to the cord loop. Young children can strangle in cord loops. They can also wrap cords around their necks and strangle.
Install Bottom Rail Operating Handle(s)
- Locate optional bottom rail handle that arrived with your shade.
- Insert front lip of the bottom rail handle into the top of the bottom rail of the shade. The handle will snap into place.
Optional bottom rail tassel will come attached to shade.
Hold-Down Brackets (optional)
- Ideal for doors, hold-down brackets prevent shade from swaying. Assemble as shown to each side of bottom rail.
- Position hold-down brackets against wall/frame, mark screw hole locations.
- Screw into marked hole locations.
Removing the Shade
Cordless - Open Roll & Standard Valance
- Fully raise the shade.
- Step 1: Press in the clear tab on the shade bracket.
- Step 2: Release one edge of the headrail from the bracket.
- Step 3: Rotate the shade to release the other edge of the headrail from the bracket.
- Step 4: Uninstall remaining brackets if necessary
CAUTION: Hold shade firmly when removing. Failure to do so may result in the shade falling and possible injury.
Cordless - Cassette Valance
- Fully raise the shade.
- Step 1: Press in the clear tab on the shade bracket.
- Step 2: Release one edge of the headrail from the bracket.
- Step 3: Rotate the shade to release the other edge of the headrail from the bracket.
- Step 4: Uninstall remaining brackets if necessary
CAUTION: Hold shade firmly when removing. Failure to do so may result in the shade falling and possible injury.
Continuous Cord Loop - Open Roll & Standard Valance
- Fully raise the shade.
- Locate clear, plastic locking ring on spring-loaded end plug
- Note: This is the side without the cord loop chain.
- Step 1: Rotate ring until to unlock
- Step 2: Press shade toward the mounting bracket
- Step 3: Carefully lower shade from mounting brackets
- Step 4: Uninstall remaining brackets if necessary
CAUTION: Hold shade firmly when removing. Failure to do so may result in the shade falling and possible injury.
Continuous Cord Loop - Cassette Valance
- Fully raise the shade.
- Step 1: While holding the headrail, use a flathead screwdriver to engage the release tab on the bottom of all of the installation brackets.
- Step 2: Rotate the bottom of the shade away from the window, fully releasing it from the brackets
- Step 3: Rotate the shade to release the other edge of the headrail from the bracket.
- Step 4: Uninstall remaining brackets if necessary
CAUTION: Hold shade firmly when removing. Failure to do so may result in the shade falling and possible injury.
Motorized - Open Roll
- Fully raise the shade.
- Step 1: Unplug battery pack from the shade.
- Step 2: Starting at the right/motor side bracket, squeeze the ends of the mounting clip to release from the bracket.
- Step 3: Slide the shade out of the right bracket, away from the window.
- Step 4: Carefully pull the shade from the left bracket, fully releasing it from the brackets.
- Step 5: Uninstall remaining brackets and battery pack if necessary.
CAUTION: Hold shade firmly when removing. Failure to do so may result in the shade falling and possible injury.
Motorized - Cassette Valance
- Fully raise the shade.
- Step 1: While holding the headrail, use a flathead screwdriver to engage the release tab on the bottom of all of the installation brackets.
- Step 2: Rotate the bottom of the shade away from the window, fully releasing it from the brackets
- Step 3: Rotate the shade to release the other edge of the headrail from the bracket.
- Step 4: Uninstall remaining brackets if necessary
CAUTION: Hold shade firmly when removing. Failure to do so may result in the shade falling and possible injury.
Roller Shades Guide
Measuring Types
Tip-to-Tip
Tip-to-Tip Measure is the common measure type for most roller shades. Choosing this measure type will include the headrail "pegs" that mount the shade to the wall or frame.
Cloth-to-Cloth
Cloth Measure is uncommon and should only be used for Outside Frame applications. The headrail is wider than the cloth of the shade which causes the "pegs" to extend beyond the width of the shade material. This total distance is 1-3/8" wide, or a gap of 11/16" on each side of the shade material.
NOTE: For outside mount applications allow the blind to overlap 1-1/2" to 3" on the sides, top and bottom of the window. You must add the overlap to your measurement; LEVOLOR does not add width or height for overlap on Outside Mounted shades.
Specifications and Critical Dimensions
| Continuous Cord Loop Cord Lengths | |
| Ordered Drop | Length |
| 0-24" | 1' |
| 24-48" | 2' |
| 48-72" | 3' |
| 72-96" | 4' |
| 96-120" | 5' |
Beaded metal chain lengths is 2/3 of total shade length.
Metal chains are provided in colors white, cream, copper, metal, gunmetal, black.
| Installation Brackets | |||
| Number of Brackets | |||
| Shade Width | Continuous Cord Loop |
Cordless | Motorized |
| Up to 38" | 2 | 2 | 3 |
| 38" to 68" | 3 | 3 | 4 |
| 68" to 82" | 4 | 4 | 5 |
| 82" to 106" | 5 | 5 | 6 |
| 106" to 144" | 6 | N/A | 7 |
Your order will include the correct number of installation brackets for your shade width, as shown in the table below.
| Standard Factory Deductions from Ordered Width | ||
| DO NOT make any deductions to your measurements | ||
| Inside Mount | Outside Mount | |
| No Valance | Up to 1/4" | 0" |
| Standard Valance | Up to 1/4" | 0" |
| Cassette Valance | Up to 1/4" | 0" |
Cassette valance will arrive with fabric insert. This cannot be overridden.
| Light Gaps (Fabric width is narrower than the finished shade) |
|||
| Light Gaps Per Side | |||
| Operating System | Lift Control | Inside Mount | Outside Mount |
| Continuous Cord Loop | Left or right control, right is standard |
Up to 3⁄4" | 0" |
| Cordless | Handle operates shade | Up to 9⁄16" | 0" |
| Motorized | Right control only | Up to 5⁄8" | 0" |
Cassette valance typically has the largest light gap.
For standard 2-on-1 shades, controls will be located on the left side of the left shade and the right side of the right shade
| Single Shade Critical Dimensions | ||||
| Min Width | Max Width | Min Height | Max Height | |
| Continuous Cord Loop | 12" | 144" | 12" | 120" |
| Cordless | 18-1/8" | 96" | 12" | 120" |
| Motorized | 16" | 144" | 12" | 120" |
| 2-on 1-Critical Dimensions | ||||
| Min Width | Max Width | Min Height | Max Height | |
| Continuous Cord Loop | 32" | 144" | 12" | 120" |
| Cordless | N/A | N/A | N/A | N/A |
| Motorized | N/A | N/A | N/A | N/A |
| Mounting Depths Requirements | |||||||
| Motorized - No Valance | Motorized - Cassette Valance | ||||||
| No Valance | Standard Valance | Cassette Valance | Standard Battery | Satellite Battery | Standard Battery | Satellite Battery | |
| Minimum Installation Depth | 1-1/2" | 1-1/2" | 2-1/8" | N/A | 1-1/2" | 3" | 2-1/8" |
| Flush Mount Installation Depth* | 2-1/2" | 3-1/4" | Med. 3" | Lg. 3-5/8" | N/A | 2-1/2" | 4-1/4" | 3" |
| Maximum Fabric Width Deduction | 1-1/4" | 1-1/4" | 1-1/2" | 1-1/4" | 1-1/4" | 1-1/2" | 1-1/2" |
| Width Tolerance | 1/16" | 1/16" | 1/16" | 1/16" | 1/16" | 1/16" | 1/16" |
| Height Tolerance | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" |
| Valance Height | N/A | 3-1/2" | Med. - 3" | Lg. - 3-1⁄2" | N/A | N/A | Med. - 3" | Lg. - 3-1⁄2" | Med. - 3" | Lg. - 3-1⁄2" |
| Extension Bracket Projection | 1-1/8" | 1-1/8" | 3" | N/A | N/A | 3" | 3" |
| *Minimum surface area needed to mount the product flush with the window frame. | |||||||
| Collection | Color | OE Key | Openness | Cassette and End Caps Color |
Cordless - Headrail and Brackets |
Coordinating Product |
|
| Solar Screen 1 | Black | 33527017 | 1% | Black | Black | N/A | |
| Brown | 335BR021 | Brown | Black | N/A | |||
| Gray | 33520803 | Gray | Gray | N/A | |||
| Iron | 335GY012 | Gray | Black | N/A | |||
| Sand | 33520864 | Cream | White | N/A | |||
| White | 335WH024 | White | White | N/A | |||
| White Sand | 33527014 | Cream | White | N/A | |||
| Solar Screen 3 | Black | 10327017 | 3% | Black | Black | Panel Track | |
| Brown | 336BR021 | Brown | Black | N/A | |||
| Gray | 33620803 | Gray | Gray | N/A | |||
| Iron | 336GY012 | Gray | Black | N/A | |||
| Sand | 10327015 | Cream | White | Panel Track | |||
| White | 10327013 | White | White | Panel Track | |||
| White Sand | 10327014 | Cream | White | Panel Track | |||
| Solar Screen 5 | Black | 33727017 | 5% | Black | Black | N/A | |
| Brown | 337BR021 | Brown | Brown | N/A | |||
| Gray | 10320803 | Gray | Gray | Panel Track | |||
| Iron | 337GY012 | Gray | Black | N/A | |||
| Sand | 10320864 | Cream | White | Panel Track | |||
| White | 10320811 | White | White | Panel Track | |||
| White Sand | 33727014 | Cream | White | N/A | |||
| Solar Screen 10 | Black | 33827017 | 10% | Black | Black | N/A | |
| Brown | 338BR021 | Brown | Black | N/A | |||
| Gray | 33820803 | Gray | Gray | N/A | |||
| Iron | 103GY012 | Gray | Gray | Panel Track | |||
| Sand | 33820864 | Cream | White | N/A | |||
| White | 10320911 | White | White | Panel Track | |||
| White Sand | 33827014 | Cream | White | N/A | |||
| Solar Screen Basket | Black | 334BK004 | 8% | Black | Black | N/A | |
| White | 334WH031 | White | White | N/A | |||
| Solar Screen Metro | Dark Gray | 334GY027 | 3% | Gray | Black | N/A | |
| Gray | 334GY028 | Gray | Black | N/A | |||
| Tan | 334BR024 | Cream | White | N/A | |||
| Solar Screen Scholar | Cream | 334WH032 | 18% | Cream | White | N/A | |
| Champagne | 334YW005 | Brown | Black | N/A | |||
| Brown | 334BR023 | Brown | Black | N/A | |||
| Solar Screen Tides | Black | 10333377 | 12% | Black | Black | Panel Track | |
| Champagne | 10333376 | Brown | Black | Panel Track | |||
| Espresso | 10329851 | Black | Black | Panel Track | |||
| Gray | 334GY020 | Gray | Black | N/A | |||
| White | 10333374 | White | White | Panel Track | |||
| Solar Screen Tweed | Bronze | 10333369 | 15% | Brown | Black | Panel Track | |
| Champagne | 10333370 | Brown | Black | Panel Track | |||
| Charcoal | 10333368 | Black | Black | Panel Track | |||
| Solar Screen Twist | Black | 334BK003 | 10% | Black | Black | N/A | |
| Dark Gray | 334GY026 | Black | Black | N/A | |||
| Woven Screen | Auburn | 10329745 | 9% | Brown | Black | Panel Track | |
| Cedar Bark | 10329746 | Brown | Black | Panel Track | |||
| * These fabrics may be railroaded i.e. turned 90 degrees to achieve a shade width above the material width limits, to maximum of 144". In such cases a seam will be sewn across the width of the shade, positioned as close to the top as possible. Any valance chosen will span the width of the blind, to maximum 144". | |||||||
Solar Roller Cord Loop and Cordless Limits
Fabric and Solar Roller Motorized Limits
Parts and Components
| Cord Loop | Component Part Number | |
| A & B | Installation Brackets, open roll | 2045145, 2045146 |
| A & B | Installation Brackets, standard valance | 2045145, 2045146 |
| C | Installation Brackets, cassette (inside mount) | 2045141 |
| D | Installation Brackets, cassette (outside mount) | 2045131 |
| E | Valance Mounting Bracket (outside mount) | HBCK0081 |
| F | Hold Down kit | DJL01873 |
| G | Tension device | 1882822 |
| Cordless | Component Part Number | |
| H | Installation Brackets, open roll (inside mount) | 1898879 |
| I | Installation Brackets, open roll (outside mount) | 1904870 |
| H | Installation Brackets, standard valance (inside mount) | 1898879 |
| I | Installation Brackets, standard valance (outside mount) | 1904870 |
| C | Installation Brackets, cassette (inside mount) | 2045141 |
| D | Installation Brackets, cassette (outside mount) | 2045131 |
| E | Valance Mounting Bracket (outside mount) | HBCK0081 |
| F | Hold Down kit | DJL01873 |
| J & K | Optional handle, Fabric and Solar / Banded | 1858599 / 2045169 |
| L | Optional tassel, Fabric and Solar | 1851720 |
| Motorized | Component Part Number | |
| M & N | Installation Brackets, open roll | 2047156, 2047157 |
| C | Installation Brackets, cassette (inside mount) | 2045141 |
| D | Installation Brackets, cassette (outside mount) | 2045131 |
| O | Motor battery clip | 2047192 |
| P | Satellite Battery Mounting Kit | KIT2791 |
| Q | Standard Battery Pack Tube | 7520064000 |
| R | 3 Channel Remote Control Kit | 1005604 |
| R | 6 Channel Remote Control Kit | 1002781 |
| S | 15 inch Satellite Extension Cable | 2989899000 |
| S | 4 Foot Satellite Extension Cable | 2989900000 |
| S | 10 Foot Satellite Extension Cable | 2989901000 |
| S | 20 Foot Satellite Extension Cable | 2989902000 |
Cleaning and Care
All LEVOLOR Solar Shades have multiple cleaning options.
Note: Improper cleaning may void warranty
Dusting - Use a feather duster for regular cleaning.
Vacuuming - Use a low suction vacuum with a brush-type cleaner attachment; stroke lightly over the shade to clean.
Forced Air - Blow away dirt and debris using clean compressed air.
Spot-Cleaning/Stain Removal at Home - Use warm water and a mild soap, like Woolite® or Scotchgard®, if needed.
Professional Injection/Extraction Cleaning - Call local on-site blind/shade cleaner that injects a cleaning solution into the fabric and extracts the dirty solution at the same time. The service is typically performed at home so you do not need to remove your window treatments.