Back to Products
Custom

Custom Sheer Shadings

• The stylish look of a shade with the light control of a blind.
• Select from 72 curated fabrics in 8 collections.
• Available in light filtering or light dimming.
• Four operating systems available including motorization.
Colors Motorization Options How to Measure How to Install Tech-Specs Exploded View Details

Motorization


 
 

Control light and privacy with a simple click

Update to LEVOLOR's motorized options to control light and privacy using a remote control or the LEVOLOR app.

 

LEVOLOR App
(with Premium 6-Channel Remote only)

Note: LEVOLOR Premium 6-channel remote is required in order to use the LEVOLOR app; Basic 3-channel remote is not compatible with app.

Premium 6-Channel Remote
 

Basic 3-Channel Remote
 

 

Comparison Chart

comparison chart
 

LEVOLOR App



LEVOLOR’s Bluetooth® enabled app allows you to schedule your window coverings to adjust automatically on a timed schedule, when paired with the Premium 6-Channel Remote.

Our unique technology allows users to program a schedule on the app while they are within range of the window covering and remote, and it will still operate once they leave the home. However, the app can not be used to adjust the programmed schedule while away from the home. The device with the app must be within the range of the remote and window covering to change the schedule.

 

bluetooth Bluetooth technology is a short-range wireless connection between electronic devices. Users need to be close by or “within range” in order for the devices to connect and talk to one another. LEVOLOR defines “within range” as being in the same room.

 

Premium Remote

Download the LEVOLOR App on your Apple and Android devices to walk through the pairing process. Use the App's scheduling function to program your window coverings to adjust automatically, while you're at home or away.

Copies of the LEVOLOR Remote Control Guide along with "How to Pair the Remote" videos are available to help walk you through the setup and operation of the 6 channel remote control.

Quick Pairing Guide: Add a shade to a GROUP.

  1. To begin program mode press and hold the stop button on remote until the white program light starts flashing
  2. Select GROUP 1 (blue light above 1 button will blink)
  3. Press and HOLD the manual control button on the window covering
  4. While continuing to hold the manual control button on the window covering, press and HOLD the up arrow on the remote
  5. Hold BOTH buttons until the window covering moves slightly up and down (should only take a few seconds)
  6. Release both buttons
  7. To end program mode, press and hold the stop button on remote until the white program lights stops flashing

The remote will now operate the shade when Group 1 is selected. Repeat steps 1-7 to add shade to groups 2-6 if desired.

 
 

Basic Remote

"How to Pair the Remote" videos are available to help walk you through the setup and operation of the 3 channel remote control.

Note: The LEVOLOR 3 channel remote will NOT pair with the LEVOLOR app. TO use the app you must purchase the 6 channel remote control.

Quick Pairing Guide: Add a shade to a GROUP.

  1. To begin program mode press and hold the stop button on remote until the red program light starts flashing
  2. Select GROUP 1 (Green light above 1 button will blink)
  3. Press and HOLD the manual control button on the window covering
  4. While continuing to hold the manual control button on the window covering, press and HOLD the up arrow (open) on the remote
  5. Hold BOTH buttons until the window covering moves slightly up and down (should only take a few seconds)
  6. Release both buttons
  7. To end program mode, press and hold the stop button on remote until the red program lights stops flashing

The remote will now operate the shade when Group 1 is selected. Repeat steps 1-7 to add shade to groups 2 & 3 if desired

 
 

Understated Elegance


Sheer Shadings delicate fabrics diffuse and soften light in rooms where understated elegance is expected.

 
 

Control the Light


Light Filtering

Enjoy the beauty of these finely selected fabrics that allow light to softly filter into the room.

 

Light Dimming

LEVOLOR’s light dimming fabrics offer the perfect amount of light blocking for privacy.

 

Best for Kids


Best for Kids

For a Best for Kids certified product, make sure to select cordless or motorized control type.

 

Control Options


Continuous Cordloop

Easily open or raise shading evenly to the height you want, while maintaining the same cord length

  • Continuous cord loop control eliminates the need to lock or unlock the cord to raise and lower shadings
  • Cords remain in same location regardless of shade position
  • Easy access to large windows

 

Retractable Cord

Popular operation to shorten the operating cord

  • Even pulls on the cord operate the shade
  • Cord remains the same length regardless of shading position

 

Cordless

Go cordless for added safety and ease of use

  • A Best for Kids option that is safer for homes with children and pets
  • Unique hinge touch point lets you raise and lower your shade without touching the fabric
  • No lift cords give your window a clean, finished look

 

Motorized

Control light and privacy with a simple click. Upgrade to LEVOLOR’s motorized options to raise and lower your shades open and close using a remote control or the LEVOLOR app.

Note: LEVOLOR 6-channel remote is required in order to use the LEVOLOR app; basic 3 channel remote is not compatible with app.

  • A single window shading can be in a group of its own, or be put into multiple groups. Up to 3 groups can be programmed with the basic remote or up to 6 groups with the premium remote
  • Operate multiple shades simultaneously or individually
  • The ALL button is used to select all programmed groups for simultaneous operation
  • Tilt vanes open and closed and lift the shadings using the remote control
  • Perfect for large or hard-to-reach windows
  • Absence of dangling cords means added safety for children and pets

LEVOLOR App
(with Premium 6 Channel Remote only)

Premium 6 Channel Remote
 

Basic 3 Channel Remote
 

comparison chart
 

Larger Window Options


2-on-1 Headrail

Ideal for multiple windows in one frame providing the clean appearance of a single shading with the ability to operate each shading independently. An excellent choice for covering wide windows, doors or double windows.

How to Measure


 
 
Measure For Inside Mounting

Measuring For Inside Mount Sheer Shadings

For a beautiful framed look

Find Width:

Measure to the nearest 1/8 in. between inside surfaces of window frame; at the top, middle, and bottom. Record the narrowest width of the three.

Find Height:

Measure to the nearest 1/8 in. from inside surface at top of window to top of sill; at the left, middle, and right. Record the tallest height of the three.

Find Depth:

Measure exact depth of window casing making note of any obstacles i.e. handles, tracks or cranks that could interfere with the blind or shade function. Use the shortest depth.

 

Measure For Outside Mounting

Measuring For Outside Mount Sheer Shadings

For increased light control and privacy

Find Width:

Measure to the nearest 1/8 in. between outermost points where shade is to be placed. Measurement should overlap each side of window frame by at least 1 1/2 in.

Find Height:

Measure to the nearest 1/8 in. from where top of shade will be located to top of sill, or measure to point of shade reach if no sill.


How to Measure Two Shades on One Headrail (2-on-1 Headrail)

INSIDE MOUNT (IM) INSTALLATION

    MEASURE WIDTH*

    Overall Shade Width - Measure to the nearest 1/8 in. between inside surfaces of window frame; at the top, middle, and bottom. Record the narrowest width of the three.

    Left Shade Width - Measure the width that you want the left shade to cover.

    Right Shade Width - Measure the width that you want the right shade to cover.

Measure For Multiple Blinds per Headrail

MEASURE HEIGHT

Overall Shade Height - Measure to the nearest 1/8 in. from inside surface at top of window to top of sill; at the left, middle and right. Record the tallest height of the three.

MEASURE DEPTH*

Overall Shade Depth - Measure exact depth of window casing making note of any obstacles i.e. handles, tracks or cranks that could interfere with the blind or shade function.
Use the shortest depth.

 

OUTSIDE MOUNT (OM) INSTALLATION

    MEASURE WIDTH*

    Overall Shade Width - Measure to the nearest 1/8 in. between outermost points where shade is to be placed. Measurement should overlap each side of window frame at lease 1-1/2 in.

    Left Shade Width - Measure the width that you want the left shade to cover.

    Right Shade Width - Measure the width that you want the right shade to cover.

    MEASURE HEIGHT

    Overall Shade Height - Measure to the nearest 1/8 in. from where top of shade will be located to top of sill, or measure to point of shade reach if no sill.

 

NOTE:

  • Available in continuous cord loop and retractable cord operating systems.
  • Order the left shade first when placing the order.
  • Each shade operates separately.
  • There will be a 3/8 in. gap between the fabric on the left and right shades to operate independently.
  • For standard shades, controls will be located on the left side of the left shade and the right side of the right shade.
  • The left shade width plus the right shade width must equal the overall shade width.*
  • Fabrics cannot be seamed or overlapped.
  • Always use a metal tape measure as cloth may stretch.
  • Take all measurements to the nearest 1/8 in. DO NOT take any deductions. The factory will make the necessary adjustments to help ensure your shadings operate smoothly.

*WIDTH CRITICAL DIMENSIONS

  • The panels of fabric for a 2-on-1 shade can be equal widths or varying widths.
  • The smallest panel width is 12 in. and maximum panel width is 108 in. with the overall size not to exceed 120 in.
  • If you choose to do two different size panels of fabric, the width of the smaller panel needs to be a minimum of 1/4 the width of the overall width.
  • Overall width of shade ÷ 4 = the smallest panel must be greater than or equal to this value.
  • Example: If you order a shade with an overall width of 80 in. the smaller panel must be at least 20 in.

NOTE: Take all measurements to the nearest 1/8 in. DO NOT take any deductions. The factory will make the necessary adjustments to help ensure your shadings operate smoothly.

 

Minimum Mounting Surface

  Cordless, Retractable Cord, or
Continuous Cord Loop
Motorized with Standard Battery Pack Motorized with Satellite Battery Pack
(IM) Minimum Casement Depth 1" 2" 1 1/4"
(IM) Casement Depth Fully Recessed 3 1/4" 4" 3 1/2"
(OM) Minimum Surface Area 1" 1" 1"
(OM) Recommend Width Overlap per side 3" 3" 3"
(SM) Minimum Surface Depth 1 1/4" 2 1/8" 1 1/2"
 

Use the above chart to verify that you have adequate window depth for mounting.

NOTE: A minimum of 1-1/8 in. flat surface area is required for installation brackets. A minimum of 1 1⁄4 in. flat surface area is required for extension brackets.

Your order will include the correct number of installation brackets based on shade purchased and correct number of spacers equal to 3⁄4 in. to accommodate battery pack. 3 3⁄16 in. extension brackets are available providing added clearance and allow shade to operate around obstructions. Must be requested at time of ordering.

 

How to Install Custom Sheer Shadings


 
 
 
 

Before you begin your installation:

Read all installation instructions!

  • Make sure that you have all tools and hardware needed for installation.
  • Check the installation surface (wall, ceiling, or window frame) to ensure that you have suitable fasteners and tools for the material.
  • Double check the headrail and shade for proper width and length. If you are installing several sets of shades, be sure to match them with the appropriate window.
  • Check the parts list shipped with the product to confirm that you have the correct number of brackets.
 

Tools You May Need (not included):

  • Flat and Phillips head screwdrivers
  • Pencil
  • Level
  • Tape measure
  • Safety glasses
  • Pliers and/or scissors(heavy duty)
  • Drill/drill bits (3/32" drill bit may be used to pre-drill for screws)
  • Wrench (if using extension brackets)
  • 1/4" Hex nutdriver (optional for mounting screws)
  • Drywall anchors

Mounting Brackets:

Two mounting screws needed per bracket.

 

Optional Brackets:

Extension Brackets

Provide added clearance, and allow the shading to operate around any obstructions. Extends headrail up to 3-3/16 in. away from the wall.

Spacers

Provide added clearance and allows the shading to operate around any obstructions. Offered in two sizes 1/4 in. and ½ in. Note: Do not add more than 1-1/2 in. of clearance using the spacer blocks.

 

Magnetic Hold Down Brackets

Magnetically secures bottom rail, when shade is in the down position.

 

Step 1A

Mark the bracket locations - outside mount installation (installation outside window casing)

  • Measure headrail width.
  • End brackets should be approximately 2"-3" in from each end of the headrail. Space additional brackets evenly between the two end brackets and mark their location. Mount into wood whenever possible.
    NOTE:Ensure that bracket placement will not interfere with any components inside the headrail.
  • With a pencil, mark the mounting screw locations through the rear holes of the bracket, 2 per bracket. Use a level to ensure bracket alignment.
  • Go to Step 1B.

Step 1B

Install the brackets - outside mount installation (installation outside window casing)

  • Using pencil marks as a guide, start the screw hole by pre-drilling (wood and metal mounting surfaces only).
    NOTE: A minimum 1-1/8" flat vertical surface is required for the installation brackets. Extension brackets require 1-1/4".
  • Hold bracket with surface marked "top" facing up. Holding bracket in place, secure with screws, 2 per bracket.
  • Repeat for each bracket.
  • Use a level to confirm brackets are level.

Example: Installation on drywall using drywall anchors and included screws.

 

 
 

Step 2A

Mark the bracket locations - inside mount installation (installation inside window casing)

  • Verify that window casing has a minimum depth of 1"
  • End brackets should be approximately 2"-3" in from each end of the headrail. Space additional brackets evenly between the two end brackets and mark their location. Mount into wood whenever possible.
  • If flush mount is desired, place the bracket 3-1/4" back from the inside top of the window frame.
  • With a pencil, mark the drill hole locations through the tip holes of the bracket, 2 per bracket.
  • Go to step 2B

Step 2B

Install the brackets - inside mount installation (installation inside window casing)

  • Using pencil marks as a guide, start the screw hole by pre-drilling (wood and metal mounting surfaces only).
  • Hold bracket with surface marked "top" facing up. Holding bracket in place, secure with screws, 2 per bracket.
  • Repeat for each bracket.
  • Use a level to confirm brackets are level.

Example: Installation on a wood window frame using the included screws.

 

 
 

Step 3A

Install shade on brackets

  • Position the shading so that the front faces you.
  • Slide the headrail into the installation brackets so the edge of the headrail is between the lever and the bracket, as shown.
  • Firmly push the headrail into each bracket until it clicks and the lever snaps to the right side of the bracket.
  • IMPORTANT: Carefully pull on the headrail at each bracket to ensure it is installed securely.
 

Sheer Shadings™ Shades Guide


Fabric and Vane Size Availability

Light Filtering in 2-in. & 3-in. Vanes 2 in. 3 in.
Montclair Beach 12MG1058 13MG1058
Candlelight 12MB3016 13MB3016
Champagne 12MG1182 13MG1182
Daylight 12MB1008 13MB1008
Mink 12MN3019 13MN3019
Rosemary 12MG1065 13MG1065
Snow 12MW1000 13MW1000
Storm Cloud 12MG3122 13MG3122
Westfall Champagne 12WB1109 13WB1109
Daylight 12WB1108 13WB1108
Graphite 12WG1015 13WG1015
Magnolia 12WB1101 13WB1101
Praline 12WN1118 13WN1118
Snow 12WW1100 13WW1100
Light Dimming in 3-in. Vanes
Camden Candlelight - 13CB3016
Custard - 13CNU205
Light Gray - 13CGY234
Mink - 13CN4019
Sand - 13CWH203
Snow - 13CWH201
Storm Cloud - 13CG4122
Whisper - 13CWH213
Light Filtering in 3-in. Vanes
Asheland Custard - 13ANU205
Doe - 13ANU226
Hazelnut - 13ANU240
Ivory - 13ABE204
Light Gray - 13AGY234
Mink - 13ANU220
Sand - 13AWH203
Snow - 13AWH201
Dresden Candlelight - 13DYW214
Doe - 13DNU226
Ivory - 13DBE204
Light Gray - 13DGY234
Snow - 13DWH201
Whisper - 13DWH213
Hampton Antique Gold - 13VNU251
Black - 13VBK252
Doe - 13VGY254
Espresso - 13VBR253
Iron - 13VGY256
Snow - 13VWH255
Hillcrest Brilliant White - 13LWH210
Custard - 13LNU205
Doe - 13LNU226
Fresh Green - 13LGE225
Ivory - 13LBE204
Mink - 13LNU220
Sand - 13LWH203
Whisper - 13LWH213
Stonebrooke Antique Gold - 13SNU265
Candlelight - 13SNU261
Custard - 13SNU262
Hazelnut - 13SBR267
Mink - 13SNU264
Sand - 13SNU263
Storm Cloud - 13SGY266
Toffee - 13SBR268

Fabric Availability by Operating System

Critical Dimensions

Additional Parts and Components

Brackets

Your order will include the correct number of installation brackets for your shading width, as shown in the tables below.
Motorized, Retractable Cord, and
Continuous Cordloop
Panel Width Brackets
12" - 36" 2
36-1/8" - 79" 3
79-1/8" - 96" 4
96-1/8" - 120" 5
Your order will include the correct number of installation brackets for your shading width, as shown in the tables below.
Cordless
Panel Width Brackets
18" - 36" 2
36-1/8" - 79" 3
79-1/8" - 84" 4
 

Hinge Pull Tab

(Cordless Shades, Only)
Unique hinge touch point lets you raise and lower your shade without touching the fabric.

Tassel

(Retractable Cord, Only)
A color coordinating tassel.

Limit Stops

Serve as the upper travel limit for the bottom rail preventing it from rotating around the fabric roll.

Cord Tensioner

(Continuous Cord Loop, Only)
Keeps cords in the same location regardless of shade position for safety and function.

 

Motorized Parts and Accessories

Standard Battery Pack

The standard power source provided with the LEVOLOR® motorized operating system. A tube of batteries that is connected to and installed behind the headrail to supply power to the window covering allowing it to link and function with the remote. Batteries can be changed without removing the window covering from the window.

Satellite Battery Pack

An optional power source that allows the battery pack to be mounted on the top of a headrail, next to molding or under the sill. It is the best choice when the window covering is mounted in a high window, restricting access to the battery pack. Satellite battery pack cover can be painted. Must be selected at time of order. (Available in 4 wire lengths: 15 inches, 4 feet, 10 feet, 20 feet)

Battery Pack Clips

Used to mount battery pack behind the headrail.

 

Alkaline Batteries

12 AA 1.5V Batteries are included with initial motorized order for both Standard and Satellite battery packs.

2 AAA alkaline Batteries are included with any remote order.

Battery life is approximately one year, but varies depending on usage, size, and weight of the shade. Replace batteries when the window covering(s) begin to operate slowly.

Battery Specifications - Motorized Only
Battery Type Qty. Included
Standard Battery Pack AA 1.5V Alkaline 12
Satellite Battery Pack AA 1.5V Alkaline 12
Standard Remote AAA Alkaline 2
NOTE: Expected battery life is one year depending on usage, and size and weight of the shade. Lithium and rechargeable batteries are not recommended.
 

Remote Control and Accessories

(Motorized Shades, Only) - Operates motorized shades.

Basic 3 Channel Remote

Premium 6 Channel Remote

 

Cleaning and Care

Cleaning Procedures

Sheer Shadings are made of 100% polyester, which means they are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly where the vanes meet the facings.

Dusting - Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.

Vacuuming - Use a low suction, hand-held vacuum for more thorough dust removal.

Forced Air - Blow away dirt and debris between the vanes using clean compressed air.

Spot-Cleaning - Do NOT spot-clean sheer shadings.

 

Ultrasonic Cleaning

Sheer Shadings can be ultrasonically cleaned by a professional with the exception of light-dimming fabrics.

• Specify that a mild detergent solution be used.

• Never immerse the headrail in the solution.

• Dry the shading completely in the lowered position.

 

Injection/Extraction

Sheer Shadings can be professionally cleaned using the injection/extraction method.

• A dry method of injection/extraction is required for light-dimming fabrics.

• Never immerse the headrail in the solution.

 

Electrostatic Cleaning

Do not use electrostatic cleaning wipes on any sheer shadings.

 

A Note About Fabrics

As with all textiles, Sheer Shading fabrics are subject to some variations. Slight wrinkling, puckering, or bowing is inherent to this textile product and should be considered normal, acceptable quality. These characteristics are not usually visible from the front or rear but may be visible from a side angle.

 

Precautions should be taken to reduce exposure to harsh environmental elements, such as salt air. Continuous exposure through open windows and doors will accelerate the fabric deterioration.

 

NOTE: Improper cleaning may void warranty.

 
↑ To Top
 

Continuous Cordloop


 

Retractable Cord


 

Cordless


 

Motorized